ukpricecomparsion.eu / Accessories / PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape
 
PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape - Best Price
 

PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape

PEI Ultem is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MP Adhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping.. Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just "pop" the model off the plate.. Before each print, wipe your PEI Ultem surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.. Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.. This is sheet are made of 100% genuine PEI Ultem material. You can clean them with acetone if you want.

Best Price: £48.64 from Amazon.co.uk

Date from 22.04.2019 04:26:02am Europe/Warsaw - More Information
Stockist Price Comparsion Best Price Buy Online

PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape

£48.64 Go to Shop

PrimaCrator PF-PEIU-165x254-05 PEI Ultem - Hoja, 500x500mm (19.7"x19.7") - 0,5mm, 1

€54.37 Go to Shop

PrimaFilaments Pei ULTEM Sheet 500 x 500 mm - 0.2 mm

€59.90 Go to Shop




PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape - Details

ASIN: B07BKFC516

EAN: 7340002110356

Availability: Usually dispatched within 24 hours

Product description: PEI Ultem is easily cut to size by scoring with a hobby knife. Laminate your sheet of PEI using 3M 468MP Adhesive Transfer Tape that came with the PEI sheet to a glass/mirror print bed, keeping in mind that 3M 468MP is a very sticky tape that is prone to clumping.

Parts should come free from the surface with almost no issue at all. PLA does not require heat, but turning the heated bed up to 45C helps. After the print is done, just let the plate cool down and then gently you can just "pop" the model off the plate.

Before each print, wipe your PEI Ultem surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.

Use isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use. In other words, PEI can be cleaned through the use of Isopropyl Alcohol, which will theoretically help adhesion should you lose it.

This is sheet are made of 100% genuine PEI Ultem material. You can clean them with acetone if you want

Weight: 1

Used items: 0

New items: 1

Size: 500x500mm (19.7"x19.7") - 0,5mm

Model: PF-PEIU-500x500-05

Manufacturer: PrimaCreator

PrimaCreator PF-PEIU-500x500-05 PEI Ultem Sheet, 500 mm x 500 mm, 0.2 mm with 3M 468MP Tape Reviews




Our rating:
Rating: 0
Votes: 1


Related Products